—
Main panel
12 × 12 inSixteen receivers, interlocking edges, flat to the floor.
Modular truck bed system
DIALED Truck Kit
The modular system for your truck bed. Interlocking panels, a receiver grid that holds gear where you put it, and a ramp handle that pulls the whole load to the tailgate. Every kit ships with a six-piece accessory starter set.
- Free shipping
- Fit guaranteed
- No drilling
1 · Your truckKit sizes to your bed
Select your truck
DIALED Truck Kit
From $399
Free shipping · lower 48
-
Fit guaranteed
Sized to the truck you picked. Wrong fit comes back on us. -
Free shipping
Every kit, lower 48. No minimum. -
No drilling
Sits on the bed. Sets up in minutes, no tools. - Secure checkout
What's in the box
- Panels{panels} main panels, 12 × 12 in, sized to a {bed} {class} bed
- Strips{strips} fit strips, 2 × 12 in, to close the width to the bed walls
- Handle1 ramp handle for the tailgate side
- Starter6-piece accessory starter set: posts and tie points that drop into any receiver
- GuidePrinted quick-start. Setup takes minutes, no tools.
Fitment
- TrucksFull-size and midsize beds from Ford, Chevrolet, GMC, Ram, Toyota, Nissan, Jeep and Rivian
- LinersSits on spray-in and drop-in liners
- CoversWorks under tonneau covers and caps
- CheckFitment is confirmed again at checkout for the truck you select
Shipping & returns
- ShipsFree shipping on every kit, lower 48
- ReturnsIf it does not fit the truck you ordered it for, it comes back on us
- Helphi@dialedtruck.com
Specs
- Module12 × 12 in main panel · 2 × 12 in fit strip
- Grid16 receivers per panel, 4 × 4 at 3 in pitch
- JoinInterlocking tabs and pockets on every panel edge
- MountNone. Sits on the bed floor; no drilling, no frame
- Fits or it comes back
- Free shipping, every kit
- Sets up in minutes, no tools
- Moves to your next truck
In the box.
Counts update with the truck you picked above. your truck
—
Fit strip
2 × 12 inCloses the width between the panel field and the bed wall.
1
Ramp handle
Tailgate sideThe grip that brings the whole floor to you.
6
Accessories
Starter set Starter + packSix-piece starter set. Drops into any receiver.
Six-piece starter set plus 8 posts, 2 dividers, 4 tie points.
How it works.
Lay the floor.
Panels interlock edge to edge from the bulkhead to the tailgate. Fit strips take up the width to the wall. No drilling, no frame, no lost bed height.
Dial it in.
Sixteen receivers per panel. Drop in a post, a divider or a tie point exactly where the load needs it. Move it when the load changes.
Pull it to you.
Grab the ramp handle and bring the whole floor, and everything on it, to the open tailgate. Load from the ground, not from your knees.
Why a floor.
Drawers take your bed. Racks take your sky. A rubber mat holds nothing. DIALED takes an inch and keeps the rest.
Modular floorDrawer system
Bed slide
Rubber mat
Keeps full bed height
Yes✓
No
No
Yes✓
No drilling
Yes✓
No
No
Yes✓
Holds gear in place
Yes✓
Yes✓
No
No
Reconfigure in seconds
Yes✓
No
No
No
Brings the load to the tailgate
Yes✓
Yes✓
Yes✓
No
Moves to your next truck
Yes✓
No
No
Yes✓
6 / 6Find my kit
2 / 6
1 / 6
3 / 6
The panel.
- Module
- 12 × 12 in main panel. One size, every panel, every kit.
- Receivers
- Sixteen per panel in a 4 × 4 grid on a 3-inch pitch. Every accessory indexes to the same grid.
- Interlock
- Tabs on two edges, pockets on the other two. Rows and columns join into one continuous floor.
- Fit strips
- 2 × 12 in. Close the width between the panel field and the bed wall so the floor runs edge to edge.
- Ramp handle
- Mounts on the tailgate side of the floor. Pull it and the whole assembly comes to you; it doubles as the ramp edge for loading.
- Install
- None. The floor sits on the bed. No drilling, no frame, no tools.
Will it fit my truck?
Pick your make, model, year and bed above and the kit sizes itself. Fitment is confirmed again at checkout, and if it does not fit the truck you selected, it comes back on us.
Does it need drilling or tools?
No. The floor sits on the bed and the panels interlock with each other. Fit strips take up the width to the walls. Accessories drop into the receivers by hand.
Does it work with a bed liner or tonneau cover?
Yes. The floor sits on spray-in or drop-in liners and under tonneau covers and caps.
What comes with the kit?
Panels and fit strips sized to your bed, the ramp handle, and a six-piece accessory starter set. The optional organizer pack adds eight posts, two dividers and four tie points.
Can I add panels or accessories later?
Yes. One module size and one receiver grid mean anything you buy later fits what you have now, in this truck or the next.
How do I get it out of the truck?
Pull the ramp handle and the whole floor slides to the tailgate. To remove it completely, unlock the panels row by row. It goes back in the same way.
Your truck. Dialed.
{kit} for your {truck}. Free shipping. Fit guaranteed.